Eaton Menvier 20 User Manual

Menvier30/40/100/300
Page 35
4. Administration
To make changes to the way your system works you must enter the Menu.
Your degree of access to the Menu depends on what type of user you are:
Master User, Admin User or Normal User.
A Master User has access to all the options of the Menu. A Master User
can add, change, or remove users in any ward, and has full access to the
system options menu.
An Admin User may be limited in the wards that they can access.
A Normal user has very limited access to the Menu: they can change their
own access code, switch Chime on or off, and operate any outputs.
A Duress user (if provided) has no access to the Menu at all.
A Guard or a Set Only user have no access to the Menu at all.
Entering and Leaving the Menu
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in an access code.


The display shows the first item in a list
of options. (See page 110 for a
complete list of options.)
4. Press  or  to scroll through
the options available, followed by  to
select (gain access) to an option.


5. Press  to confirm an option
when you have finished making
changes.
6. Press  (if necessary several
times) to leave the Menu.


(If you do not press any keys on the keypad for 60 seconds then the
display returns to the standby screen.)

Eaton Menvier 20 Specifications

General

Brand	Eaton
Model	Menvier 20
Category	Security System
Language	English