DRAFT - 26 March 2015
SM45-55-SAD Rev 3
98
7 Appendices
7.1 Appendix A: Summary of applicable standards
The annex lists together all standards referred to in the previous sections of this document:
IEC 61508:2010 Functional safety of electrical/electronic/programmable electronic
safety-related systems. Parts 1 and 2 as relevant.
EN 61131-2:2003 Programmable controllers – Part 2: Equipment requirement and tests
(EMC requirements).
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use –
EMC requirements. (Criterion A).
IEC 61326-3-1:2008 Electrical equipment for measurement, control and laboratory use -
EMC requirements - Part 3-1: Immunity requirements for equipment
performing or intended to perform safety-related functions (functional
safety) - General industrial applications. (Criterion FS).
NE21 : 2007 Electromagnetic Compatibility of Industrial Process and Laboratory
Control Equipment. (Criterion A).
Lloyds Register Type Approval
System : 2002,
Test Specification Number 1.
(Specifically vibration: 1.0mm displacement @ 5 to 13.2Hz and 0.7g
acceleration @13.2Hz to 100Hz per IEC60068-2-6, test Fc).
IEC 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-27 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
To Next Page
Loading...