33
INM MTL83xC PC Modbus Rev 4
Menu option “4” contains settings for Modbus TCP. We recommend using the defaults, but they may
be changed if needed for your environment. Below is a capture of the questions and options where
<Enter> was pressed to accept the default for each option:
As we have already said we do not recommend enabling any of the settings in the security section.
When you have completed making the changes you required for the Ethernet port, press the “S” key
to Save your changes. This will cause the Ethernet Port to reboot. The Ethernet Configuration screen
will automatically close.
If you wish to exit without saving changes press the “Q” key. This too causes the Ethernet module
to reboot and the Ethernet Configuration screen to close.
To Next Page
Loading...
Need help?
General
