Need help?Do you have a question about the Eaton multimatic HotSwap MBP3KI and is the answer not in the manual?
General| Product Name | Eaton multimatic HotSwap MBP3KI |
|---|---|
| Category | UPS |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Power Capacity | 3000 VA / 2700 W |
| Topology | Double Conversion Online |
| Form Factor | Tower |
| Transfer Time | 0 ms |
| Efficiency | up to 95% |
| Operating Temperature | 0 to 40 °C |
| Battery Type | Lead-acid |
| Communication Ports | USB, RS-232 |
General safety rules for product installation and usage, including environmental and electrical precautions.
Explains the purpose of the HotSwap MBP module for servicing UPS without interrupting connected loads.
Details the operation of the module's rotary switch, including Normal and Bypass modes.
Step-by-step guide for starting the UPS correctly when connected to the HotSwap MBP module.
Procedure to test the HotSwap MBP module by switching to Bypass mode and verifying load supply.
Procedure for maintenance and replacement of the UPS using the HotSwap MBP module.
Details the input connector (IEC 320 C20) and output connectors (C13, C19) of the HotSwap MBP.
Provides physical dimensions and performance data including voltage, frequency, current, and power.
Lists the various standards and certifications the HotSwap MBP product models comply with.
Specifies product marking (CE) and operational/storage environmental conditions for temperature, humidity, and altitude.
To Next Page
