Need help?Do you have a question about the Eaton Network Management Card and is the answer not in the manual?
Provides overview of Eaton Network Solution, its functions, and components.
Details the features and compatibility of the Network Management Card (NMC).
Provides instructions on how to physically install the Network Management Card into a UPS.
Details how to set up the network (IP) parameters for the card.
Describes how to verify the card's operational status after configuration.
Explains how to view UPS status and properties via the web interface.
Details the information displayed on the UPS properties page and its refresh rate.
Explains how to access and interpret the alarm table.
Describes the default login credentials and process.
Explains how to manage UPS startup and shutdown sequences.
Covers the configuration of UPS operating parameters during battery mode and power restoration.
Covers the configuration of network parameters and remote upgrade authorization.
Details how to configure secure access to the card via browser or SNMP.
Guides on how to upload a new firmware version to the card.
Explains how to view temperature, humidity, and contact status from the sensor.
Details how to adjust temperature, humidity, and contact thresholds.
Explains how to configure shutdown parameters for protected servers.
Describes various shutdown sequences for servers and UPS.
Details network parameter configuration via CLI interfaces.
Details access control configuration via CLI interfaces.
Accesses network settings for configuration via RS232.
Restores all card parameters to their default configuration via RS232.
Provides tables of alarms and events for UPS and system status.
Details SNMP objects and their MIB definitions.
Defines key terms and acronyms used in the manual.
Provides overview of Eaton Network Solution, its functions, and components.
Details the features and compatibility of the Network Management Card (NMC).
Provides instructions on how to physically install the Network Management Card into a UPS.
Details how to set up the network (IP) parameters for the card.
Describes how to verify the card's operational status after configuration.
Explains how to view UPS status and properties via the web interface.
Details the information displayed on the UPS properties page and its refresh rate.
Explains how to access and interpret the alarm table.
Describes the default login credentials and process.
Explains how to manage UPS startup and shutdown sequences.
Covers the configuration of UPS operating parameters during battery mode and power restoration.
Covers the configuration of network parameters and remote upgrade authorization.
Details how to configure secure access to the card via browser or SNMP.
Guides on how to upload a new firmware version to the card.
Explains how to view temperature, humidity, and contact status from the sensor.
Details how to adjust temperature, humidity, and contact thresholds.
Explains how to configure shutdown parameters for protected servers.
Describes various shutdown sequences for servers and UPS.
Details network parameter configuration via CLI interfaces.
Details access control configuration via CLI interfaces.
Accesses network settings for configuration via RS232.
Restores all card parameters to their default configuration via RS232.
Provides tables of alarms and events for UPS and system status.
Details SNMP objects and their MIB definitions.
Defines key terms and acronyms used in the manual.
General| Model | Network Management Card |
|---|---|
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Network Protocols | TCP/IP, HTTP, HTTPS, SNMP, SMTP, Telnet, SSH |
| Management Interface | Web-based, CLI |
| Security | SSH |
| Firmware Upgrade | Remote firmware upgrade |
| Event Logging | Yes |
| Environmental Monitoring | Optional environmental sensor support |
| Communication Interface | Ethernet (10/100Base-T) |
| Remote Monitoring | Yes |
| Remote Control | Yes |
| Alerting | Email, SNMP traps |
| Management Features | Automated shutdown |
| Power Requirements | Powered by connected UPS |
| Humidity | 95% non-condensing |
To Next Page
