Need help?Do you have a question about the Eaton Network-M2 and is the answer not in the manual?
Guide for connecting the module for Modbus communication.
Procedures for connecting to and accessing the module's interface.
Steps to connect to the module's web interface via a network.
Settings and configuration for Modbus communication.
Solutions for common issues encountered with the web interface.
Features related to protecting the system and managing shutdown agents.
Configuring shutdown behavior during power outages.
Configuration options for various network and module settings.
Network and protocol settings including IPv4, IPv6, DNS/DHCP, Ethernet, HTTPS, and Syslog.
Configuration for Modbus RTU and TCP, including mapping.
Managing and viewing system alarms.
Steps for configuring and testing LDAP connections.
Process of pairing shutdown agents with the Network Module.
Procedures for upgrading the Network Module firmware.
Procedures for resetting user credentials.
Steps to recover the main administrator password.
Configuring static IP addresses for the Network Module.
Managing module configuration files.
Troubleshooting steps when an action is disallowed in policy settings.
Resolving "Full acquisition has failed" errors due to incorrect timestamps.
Troubleshooting steps when a client server fails to restart.
Solutions for issues where EMPs are not detected during the discovery process.
Steps to recover or reset a forgotten password.
Troubleshooting communication issues between software and the Network Module.
Guidance for troubleshooting LDAP configuration problems.
Resolving issues with changing user profile passwords.
Troubleshooting SNMPv3 password issues after save/restore operations.
Guide for connecting the module for Modbus communication.
Procedures for connecting to and accessing the module's interface.
Steps to connect to the module's web interface via a network.
Settings and configuration for Modbus communication.
Solutions for common issues encountered with the web interface.
Features related to protecting the system and managing shutdown agents.
Configuring shutdown behavior during power outages.
Configuration options for various network and module settings.
Network and protocol settings including IPv4, IPv6, DNS/DHCP, Ethernet, HTTPS, and Syslog.
Configuration for Modbus RTU and TCP, including mapping.
Managing and viewing system alarms.
Steps for configuring and testing LDAP connections.
Process of pairing shutdown agents with the Network Module.
Procedures for upgrading the Network Module firmware.
Procedures for resetting user credentials.
Steps to recover the main administrator password.
Configuring static IP addresses for the Network Module.
Managing module configuration files.
Troubleshooting steps when an action is disallowed in policy settings.
Resolving "Full acquisition has failed" errors due to incorrect timestamps.
Troubleshooting steps when a client server fails to restart.
Solutions for issues where EMPs are not detected during the discovery process.
Steps to recover or reset a forgotten password.
Troubleshooting communication issues between software and the Network Module.
Guidance for troubleshooting LDAP configuration problems.
Resolving issues with changing user profile passwords.
Troubleshooting SNMPv3 password issues after save/restore operations.
General| Type | Network Management Card |
|---|---|
| Ports | 1 x RJ-45 Ethernet port |
| Communication | Ethernet |
| Weight | 0.1 kg (0.22 lbs) |
| Compatibility | Eaton UPS systems |
| Network Protocols | HTTP, HTTPS, SNMP |
| Security | Password protection |
| Management | Web-based interface, SNMP |
| Power Source | Powered by the UPS |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Certifications | CE, FCC, RoHS |
To Next Page
