Eaton Network-M2 - Battery Health

Meters
Contextual help of the web interface – 47
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3.3.4.1 Overview/Environment
Type
Nominal capacity
Nominal voltage
Capacity remaining
Runtime
State
Recommended replacement date
State of health
Voltage
Current
Temperature
Min cell voltage
Max cell voltage
Number of cycles
Min temperature
Max temperature
BMS state
3.3.5 Battery health
Battery health section provides status of the battery andallow to launch a battery test.
The status reflects thelast completed battery test result,as well as itscritical status (color) and completion time.
Pass
Warning
Fail
Unknown
3.3.5.1 Commands
Launch test button is disabled if a battery test is already in progress or scheduled.
TheAbort test button is enabled only when a test is in progress or scheduled.
3.3.5.2 Pending action
The pending action reflects thebattery test status.