Eaton Network-M2 - Netconf

 CLI
Information – 248
7.7.9.3 Specifics
7.7.9.4 Access rights per profiles
Administrator Operator Viewer
modbus_statistics*
*for INDGW only
7.7.10 netconf
7.7.10.1 Description
Tools to display or change the network configuration of the card.
7.7.10.2 Help
For Viewer and Operator profiles:
netconf -h
Usage: netconf [OPTION]...
Display network information and change configuration.

-h, --help display help page
-l, --lan display Link status and MAC address
-4, --ipv4 display IPv4 Mode, Address, Netmask and Gateway
-6, --ipv6 display IPv6 Mode, Addresses and Gateway
-d, --domain display Domain mode, FQDN, Primary and Secondary DNS

For Administrator profile: