Eaton Network-M2 - Modbus

 Settings
Contextual help of the web interface – 118
3.7.5.4.1 For other settings
3.7.5.5 Access rights per profiles
Administrator Operator Viewer
SNMP
3.7.5.5.1 For other access rights
3.7.5.6 Troubleshooting
SNMPv3 password management issue with Save and Restore
Affected FW versions
This issue affects SNMPconfigurationdone on versions prior to 1.7.0 when applied to versions 1.7.0 or above.
Symptom
SNMPv3 connectivity is not properly working after a restore settings on a 1.7.0 version or above.
Cause
The SNMPv3 wasconfiguredprior to 1.7.0.
In that case, SNMPv3 configuration is not well managed by the Save and by the Restore settings.
Action
Reconfigureyour SNMPv3 users and passwords on versions 1.7.0 or above and Save the settings.
The SNMPv3 configuration can then be Restored.
3.7.5.6.1 For other issues
3.7.6 Modbus
For other settings, see the Information>>>Default settings parameters section.
For other access rights, see the Information>>>Access rights per profiles section.
For details on other issues, see the Troubleshooting section.