Eaton Network-M2 - Modbus_Statistics

CLI
Information – 247
•
•
•
•
•
•
•
•
•
•
•
•
7.7.8.1 Description
modbus_message_display restarts the server and displays Modbus message. This command allow you to verifiy that Modbus
server is working as expected.
7.7.8.2 Help
modbus_message_display
--help Restart server and display modbus message
-h Restart server and display modbus message
7.7.8.3 Specifics
7.7.8.4 Access rights per profiles
Administrator Operator Viewer
modbus_message_display*
*for INDGW only
7.7.9 modbus_statistics
7.7.9.1 Description
modbus_statistics displays Modbus RTU and TCP status and server statistics:
Bus character overrun count
Bus frame error count
Bus parity error count
Buffer overrun count
Bus message count
Valid message count
CRC error count
Incoming message count
Discarded message count
Processed message count
Success returned count
Exception returned count
7.7.9.2 Help
modbus_statistics
Display modbus server statistics

-h, --help Display the help page.
-r, --reset Reset modbus server statistics.
The counter from A1.1 to A1.4 are reset only at startup of the
server.
This section is only for the Modbus Network Module INDGW