Need help?Do you have a question about the Eaton Network-M3 and is the answer not in the manual?
General| Model | Network-M3 |
|---|---|
| Type | Network card |
| Operating Temperature Max | 40 °C |
| Storage Temperature Min | -20 °C |
| Connector Type | RJ45 |
| Interface | Ethernet |
| Network Protocols | Modbus TCP |
| Compatibility | Eaton UPSs |
| Management | Web-based, SNMP |
| Power Supply | Powered via UPS |
| Operating Temperature | 0 °C |
| Storage Temperature | -20°C |
| Storage Humidity | 5% to 95% non-condensing |
| Data Transfer Rate | 10/100 Mbps |
| Humidity | 5% to 95% non-condensing |
General overview of the installation process for the network management module.
Instructions for unpacking the network module and its included accessories.
Initial steps to begin using the network module after unpacking.
Steps for physically installing the network module into the device.
Guide to connect and access the module via web interface or serial connection.
Details on configuring module network settings through its web interface.
Information on the login screen, default credentials, and first-time login procedures.
Description of the Home screen, its layout, and displayed key information.
Details on viewing power quality meters and associated data logs.
Explains how to control UPS and outlet status, including commands.
Information on managing shutdown agents and their sequencing for protection.
Covers commissioning, status, and configuration of environmental sensors.
Configuration options for general, date/time, email, SMTP, users, and network settings.
Steps for configuring, commissioning, and testing LDAP connections.
Procedures for pairing shutdown agents with the network module.
Examples of managing power sequences for IT systems during outages.
Methods to access and check the current firmware version.
Instructions on downloading the latest firmware and drivers.
Guide on upgrading firmware via web interface or shell script.
Steps for replacing the Real-Time Clock (RTC) battery cell.
Procedure to update the module's time using an NTP server.
Explanation of time synchronization between the module and UPS.
How to change the web interface language in the settings.
Procedures for resetting user credentials and recovering administrator passwords.
Steps to recover the main administrator password via sanitization.
Guide to configure static IP settings or change the module's IP address.
Simple methods to access device information on the web page.
How to configure email notifications for specific alarms.
Procedures for saving, restoring, and duplicating configuration settings.
Guidance on applying Eaton solutions for power management security in electrical systems.
Best practices and recommendations for hardening the network module's security.
Defining user profiles and assigning permissions for system access.
Steps for securely decommissioning the module, including data sanitization.
Overview of the Environmental Monitoring Probe (EMP) and its key features.
Instructions for unpacking the EMP sensor and its included accessories.
Detailed steps for installing the EMP, including addressing and mounting.
Procedures for commissioning the EMP on the Network Module device.
How to use the EMP for temperature compensated battery charging in UPS systems.
Identification and description of front panel connectors and status LEDs.
Listing of physical, environmental, module, and function specifications.
Details default settings and possible parameters for various configurations.
Defines access rights for Administrator, Operator, and Viewer profiles.
Lists critical, warning, and info event codes with messages and files.
Information on SNMP traps, including MIB details.
Overview of Command Line Interface (CLI) commands and their usage.
Addresses issues where actions are not permitted by the UPS.
Solves errors caused by incorrect card timestamps affecting software acquisition.
Troubleshooting for client server restart issues after power restoration.
Diagnoses and resolves issues with EMP communication status showing "Lost".
Troubleshooting steps for EMP detection failures during discovery.
Guidance on recovering a forgotten password for login.
Solves communication issues between software and the network module.
Addresses problems with LDAP configuration and commissioning.
Troubleshoots issues with changing passwords in the user profile.
How to retrieve alarm data after it has been cleared post-upgrade.
Solutions for when the network module fails to boot after firmware upgrade.
Resolves issues where the web interface is outdated after firmware upgrade.
To Next Page
