Eaton Network-M3 - Default settings and possible parameters

Default settings and possible parameters
Information – 229
Settings (default values)
Web interface access
control
User name: admin | Password: admin
Settings/Device data
connector
USB RNDIS Apipa compatible | IP address: 169.254.0.1 | Subnet mask: 255.255.0.0
7.3 Default settings and possible parameters
7.3.1 Meters
Default settings and possible parameters - Meters
Default setting Possible parameters
Meters/Logs Log measures every—60s Log measures every — 3600s maximum
7.3.2 Settings
Default settings and possible parameters - General
Default setting Possible parameters
System details Location—empty
Contact—empty
System name—empty
Time & date settings—Manual (Time zone: 
Europe/Paris)
Location — 31 characters maximum
Contact— 255 characters maximum
System name— 255 characters maximum
Time & date settings—Manual (Time zone: selection
on map/Date) / Dynamic (NTP)