Eaton Network-M3 - Traceroute and Traceroute6

CLI
Information – 280
Usage: time [OPTION]...
Display time and date, change time and date.
 -h, --help display help page
 -p, --print display date and time in YYYYMMDDhhmmss format
-s, --set <mode>
 Mode values:
 - set date and time (format YYYYMMDDhhmmss)
manual <date and time>
 - set preferred and alternate NTP servers
ntpmanual <preferred server> <alternate server>
- automatically set date and time
ntpauto
Examples of usage:
-> Set date 2017-11-08 and time 22:00
 time --set manual 201711082200
-> Set preferred and alternate NTP servers
 time --set ntpmanual fr.pool.ntp.org de.pool.ntp.org
7.7.17.3 Examples of usage
-> Set date 2017-11-08 and time 22:00
time --set manual 201711082200
-> Set preferred and alternate NTP servers
time --set ntpmanual fr.pool.ntp.org de.pool.ntp.org
7.7.17.4 Specifics
7.7.17.5 Access rights per profiles
Administrator Operator Viewer
time
(read-only) (read-only)
7.7.18 traceroute and traceroute6
7.7.18.1 Description
Traceroute and traceroute6 utilities are for checking the configuration of the network.
7.7.18.2 Help
traceroute
-h Specify maximum number of hops
<Hostname or IP> Remote system to trace
traceroute6
-h Specify maximum number of hops
<IPv6 address> IPv6 address