Eaton Network-M3 User Manual

Meters
Contextual help of the web interface – 43
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3.3.3 Data logs
3.3.3.1 Logs
This log configuration allows to define the log acquisition frequency of the Device measures only.
3.3.3.1.1 Download
Press the icon on the top right to download the Device log file.
If available, possible measures are listed below:
Input Voltage (V)
Input Frequency (Hz)
Bypass Voltage (V)
Bypass Frequency (Hz)
Output Voltage (V)
Output Frequency (Hz)
Output Current (A)
Output Apparent Power (VA)
Output Active Power (W)
Output Power Factor
Output Percent Load (%)
Battery Voltage (V)
Battery Capacity (%)
Battery Remaining Time (s)
3.3.4 Default settings and possible parameters - Meters
Default setting Possible parameters
Meters/Logs Log measures every—60s Log measures every — 3600s maximum
The sensors measures logs acquisition is not settable and done every minutes. Sensors measures logs are
accessible in Environment menu.

Eaton Network-M3 Specifications

General

Brand	Eaton
Model	Network-M3
Category	Network Card
Language	English