Eaton Network-M3 - Ping and Ping6

CLI
Information – 274
Status values:
- enable IPv6
enable
- disable IPv6
disable
-x, --set-ipv6 <mode>
Mode values:
- set custom Network address, Prefix and Gateway
manual <network> <prefix> <gateway>
- automatically set Network address, Prefix and Gateway
router
Examples of usage:
-> Display Link status and MAC address
 netconf -l
-> Set Auto negotiation to Link
 netconf --set-lan auto
-> Set custom hostname
 netconf --set-domain hostname ups-00-00-00-00-00-00
-> Set Adress, Netmask and Gateway
 netconf --set-ipv4 manual 192.168.0.1 255.255.255.0 192.168.0.2
-> Disable IPv6
7.7.7.3 Examples of usage
-> Display Link status and MAC address
netconf -l
-> Set Auto negotiation to Link
netconf -s auto
-> Set custom hostname
netconf -f hostname ups-00-00-00-00-00-00
-> Set Adress, Netmask and Gateway
netconf -i manual 192.168.0.1 255.255.255.0 192.168.0.2
-> Disable IPv6
netconf -6 disable
7.7.7.4 Specifics
7.7.7.5 Access rights per profiles
Administrator Operator Viewer
netconf
(read-only) (read-only)
7.7.8 ping and ping6
7.7.8.1 Description
Ping and ping6 utilities are used to test network connection.