Need help?Do you have a question about the Eaton Power Xpert Series and is the answer not in the manual?
General| Product Type | Uninterruptible Power Supply (UPS) |
|---|---|
| Topology | Double Conversion Online |
| Frequency | 50/60 Hz |
| Cooling Method | Forced Air |
| Efficiency | Up to 96% |
| Form Factor | Tower or Rackmount (depending on model) |
| Protection Features | Overload, Short Circuit, Over Temperature |
| Communication | Modbus |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Enclosure Rating | IP20 |
Overview of standard UPS features for reliable power protection.
Information on optional features and add-ons for enhanced UPS functionality.
Requirement for a battery system for emergency backup power and its specifications.
Guidance on how to read and use the manual for installation and operation.
Explanation of text and formatting conventions used throughout the manual.
Examples of symbols and their meanings used to alert users.
Information on how to obtain assistance and contact support for the UPS system.
Essential safety guidelines for installation, maintenance, and operation of the UPS.
Alerts regarding lethal voltages, electrical hazards, and proper handling procedures.
Safety measures and warnings related to handling and disposing of batteries.
Guidelines for safely lifting and moving the UPS cabinet to prevent damage.
Steps to develop a logical plan for installing the UPS system.
Site requirements for optimal UPS efficiency, including environmental and physical factors.
Procedures for safely inspecting and unpacking UPS cabinets.
Initial considerations and references for the UPS system installation process.
Steps for safely unloading UPS sections from their shipping pallets.
Procedure for physically connecting the UPS sections together.
Steps for making electrical connections between the UPS sections.
Instructions for installing the external battery system.
Guidelines for connecting external power and battery wiring.
Procedures for connecting various interface terminals and cables.
Instructions for installing a Remote Emergency Power-off (REPO) switch.
Guidance on installing optional components and control wiring.
Procedures for initial startup and checks, requiring authorized personnel.
Final checklist to ensure all installation tasks are completed correctly.
Instructions for installing the Hot Sync CAN Bridge Card for parallel operation.
Guide for installing the Remote Monitor Panel II for remote status monitoring.
Steps for installing the Relay Interface Module II for status and alarm signals.
Instructions for installing the Supervisory Contact Module II for monitoring UPS status.
Provides dimensions for mounting various optional accessories.
Describes the main components and functionality of the Eaton Power Xpert 9395C UPS system.
Details various operating modes like Online, ESS, Bypass, and Battery modes.
Explains procedures for transferring the UPS to maintenance bypass and load bank.
Shows simplified internal structure diagrams of UPS configurations.
Identifies controls and indicators for monitoring and operating the UPS.
Locates the color touchscreen control panel on the UPS front door.
Guides on using the touchscreen interface, menus, and screens for UPS operation.
Step-by-step instructions for operating the UPS, including starting and emergency shutdown.
Describes the four standard X-Slot communication bays and compatible cards.
Details Eaton's PredictPulse service for remote monitoring and data analysis.
Information on Eaton's Intelligent Power software for UPS management.
Feature for connecting UPS to building alarm systems like smoke detectors.
Details the standard relay contact for system status alerts.
Optional panel for remote status monitoring and local horn.
Module providing relay contact closures for UPS status and alarms.
Module establishing an interface to customer monitors for operational status.
Critical safety guidelines for performing maintenance on the UPS and batteries.
Outlines daily, monthly, periodic, and annual maintenance tasks for the UPS.
Instructions for installing batteries according to manufacturer guidelines.
Guidelines for proper disposal and recycling of batteries and UPS equipment.
Information on available training courses for UPS operation and maintenance.
Lists available Eaton Power Xpert 9395C UPS models and their power ratings.
Details input, output, environmental, and battery specifications for the UPS.
To Next Page