Need help?Do you have a question about the Eaton Power Xpert Gateway 900 and is the answer not in the manual?
General| Model | Power Xpert Gateway 900 |
|---|---|
| Category | Gateway |
| Manufacturer | Eaton |
| Ethernet Ports | 2 |
| USB Ports | 1 |
| Web Server | Yes |
| Data Logging | Yes |
| Operating Temperature | -20°C to 60°C |
| Power Consumption | 10W |
| Communication Protocols | Modbus TCP, Modbus RTU, SNMP |
| Power Supply | 24 VDC or 100-240 VAC |
| Humidity Range | 5% to 95% (non-condensing) |
Important safety precautions and warnings for device installation and operation.
Lists the components included in the PXG900 kit for installation.
Lists the necessary items and tools for installing the gateway.
Lists prerequisites for configuring the gateway, including software and hardware.
Steps to configure the gateway's IP address via DHCP or static IP.
Instructions to edit network settings in the gateway's interface.
Overview of configurable settings within the gateway interface.
Details settings related to date, time, localization, and access control.
Configuration details for Modbus serial ports.
Configuration details for the INCOM serial port.
Step-by-step guide to adding an IQ 250 meter to the gateway.
Step-by-step guide to adding a Digitrip 1150 breaker to the gateway.
Explains the meaning of Ethernet link speed and activity LEDs.
To Next Page
