Need help?Do you have a question about the Eaton Power Xpert 1000 Series and is the answer not in the manual?
General| Input Voltage | 100-240V AC |
|---|---|
| Display | LCD |
| USB Ports | 1 |
| Data Logging | Yes |
| Web Server | Yes |
| Power Supply | Internal |
| Operating Temperature | 0°C to 50°C |
| Mounting | DIN Rail |
| Certifications | UL, CE |
| Communication Protocols | Modbus TCP, SNMP |
| Serial Ports | 1 RS-485 |
| Humidity | 5% to 95% non-condensing |
| Model | Power Xpert 1000 Series |
Verify required items for installation of the PXGX Series 1000 Card.
Procedure for physically installing the PXGX Series 1000 Card into the PDU/RPP/RPM.
Steps to connect the card to a computer for configuration.
Guidance on assigning IP addresses via DHCP or manually.
Configuring network settings via the card's Web page.
Default security configurations and restrictions for SNMP/Modbus/TCP access.
Procedure to modify user and admin passwords for the card's web interface.
Setting up community strings, trap recipients, and access restrictions.
Information on registers for PDU/RPP/RPM data and alarms.
Detailed technical specifications of the PXGX Series 1000 Card.
Definitions and functions of the DIP switches on the card.
How to view, acknowledge, and close active alarms.
Steps to update the firmware for the PXGX Series 1000 Card.
To Next Page