Need help?Do you have a question about the Eaton PVM074 and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | PVM074 |
| Category | Water Pump |
| Language | English |
Explains how the axial piston pump operates, focusing on swash plate interaction.
Describes the three common pump control types: 'A', 'B+C', and 'IC' controls.
Comprehensive list of parts for PVM018 and PVM020 models, including part numbers and quantities.
Comprehensive list of parts for PVM045 and PVM050 models, including part numbers and quantities.
Comprehensive list of parts for PVM057 and PVM063 models, including part numbers and quantities.
Comprehensive list of parts for PVM074 and PVM081 models, including part numbers and quantities.
Comprehensive list of parts for PVM098 and PVM106 models, including part numbers and quantities.
Comprehensive list of parts for PVM131 and PVM141 models, including part numbers and quantities.
Part codes for pressure compensators based on model code position for PVM018/020.
Part codes for pressure compensators based on model code position for PVM045/050.
Part codes for pressure compensators based on model code position for PVM057/063.
Part codes for pressure compensators based on model code position for PVM074/081.
Part codes for pressure compensators based on model code position for PVM098/106.
Part codes for pressure compensators based on model code position for PVM131/141.
Explains the meaning of each code position for PVM018 and PVM020 model numbers.
Explains the meaning of each code position for PVM045 and PVM050 model numbers.
Explains the meaning of each code position for PVM057 and PVM063 model numbers.
Explains the meaning of each code position for PVM074 and PVM081 model numbers.
Explains the meaning of each code position for PVM098 and PVM106 model numbers.
Explains the meaning of each code position for PVM131 and PVM141 model numbers.
Instructions for ordering replacement parts, including product number, date code, and part information.
Explains how to interpret the serial number and date code stamped on the pump's identification tag.
Lists specialized tools essential for specific disassembly and assembly tasks on the pump.
Procedure for removing the pump shaft, including safety warnings related to internal springs.
Guidance on removing the rotating group, with critical warnings about spring compression.
Specifies allowable end play and face dimensions for piston shoe assemblies.
Procedure for connecting the control sleeve/piston sub-assembly to the swash plate.
Procedure for seating the swash plate and rotating group into the saddle bearings.
Detailed steps for initial pump start-up, including fluid filling, air bleeding, and running checks.
A chart identifying common pump problems, their causes, and recommended solutions.
Table detailing torque values for various plugs and fasteners used in pump assembly.
Provides torque ratings for specific parts across different PVM pump sizes.
To Next Page
