Need help?Do you have a question about the Eaton Vickers PVE12 and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | Vickers PVE12 |
| Category | Water Pump |
| Language | English |
Describes operational characteristics and overhaul information for PVE pumps.
Provides details on related publications and model code breakdown.
Overview of compensator subassemblies and their principles of operation.
Details pump ratings and where to find installation information.
Explains the basic working principle of the piston pump mechanism.
Details the operation of the flat cut-off compensator.
Explains the CG compensator and its remote control capability.
Describes the load sensing compensator and its application.
Explains the combined load sensing and pressure limiting compensators.
Provides guidance on mounting the pump and connecting the drive.
Information on fluid selection for optimal system performance and life.
Procedures for safely starting up the pump and system.
Lists standard and special tools required for overhaul and maintenance.
Outlines regular checks for fluid condition and connections.
A chart listing common pump problems, causes, and remedies.
Safety precautions and general notes before starting overhaul.
Step-by-step removal instructions for the compensator assembly.
Guidelines for inspecting parts for wear and damage.
Procedures for removing and taking apart the pump's rotating group.
Step-by-step guide for assembling the pump housing components.
Instructions for disassembling the valve block.
Instructions for reassembling the valve block.
Procedure for adjusting shaft bearing preload on PVE 19/21 models.
Final assembly steps for the PVE series pump.
Specifies fluid medium, temperature, and contamination limits.
Instructions for setting up the test circuit and connecting the unit.
General steps for conducting performance tests on the pump.
Specific test requirements for the "C" compensator.
Test requirements for the "CG" compensator control.
Test requirements for CV, CVP, CVPC, and CVPD compensator controls.
Procedures for testing the load sensing control functionality.
To Next Page