Eaton PXG 900 User Manual

PXG 900 User’s Guide
Power Xpert Gateway 900

Eaton PXG 900 Specifications

General

Brand	Eaton
Model	PXG 900
Category	Measuring Instruments
Language	English

Summary

Connecting the PXG to a PC

Connecting With a USB Cable

Instructions for connecting the PXG to a PC using a USB cable.

Connecting via an Ethernet Cable

Alternative method to connect the PXG to a PC using an Ethernet cable.

Configuring the PXG

Configuring Ethernet Access

Setting up IP addresses (static or DHCP) for the PXG's Ethernet connection.

Configuring Device Communications

Modbus Serial Ports

Setting up serial port parameters for Modbus RTU network connections.

INCOM Port

Configuring serial settings for the INCOM port and wiring INCOM devices.

Network 2 (Ethernet)

Connecting devices using Modbus TCP via the Network 2 Ethernet port.

Initial Setup

Setting Preferences

Network Access Settings

Access Control

Modbus TCP Server

Modbus TCP Server Setup

Configuring the PXG to act as a Modbus TCP server and managing its response.

BACnet IP Server

Setting up a BACnet/IP Server

Notifications

Setting up the Email Server

Users and Access Control

User Configuration

Role Configuration

Password Policy

User Password Management

Setting Alarms

Creating an Alarm Configuration

Setting custom alarm triggers and messages for device channels.

One-lines

Creating One-Lines

Connecting to the Web Interface

Network Tab

Alarms Tab

One-lines Tab

Cybersecurity Hardening the PXG

Enabling User Management of Root Certificates

Configuring certificate stores to allow trusted root CAs for secure connections.

Passwords

Reset Button