54
PTO Operation
PTO Operation
Note: The electric motor powering the ePTO is activated by a hydraulic demand signal generated by the hydraulic system. It will
start and stop with hydraulic usage.
ePTO Shutdown Procedure:
1. Shutdown and return PTO driven equipment to storage position.
2. Push “ePTO” button on shift console once to shut down electric power take-off.
3. Turn key to “off” position to shutdown vehicle or turn key to “start” position to start engine for driving.
Note: Refer to Truck Equipment Manufacturer/Body Company manuals for proper use of PTO tools and equipment.
Note: The electric motor powering the ePTO is activated by a hydraulic demand signal generated by the hydraulic system. It will
start and stop with hydraulic usage.
To Next Page
Loading...
Need help?
General
