Eaton SPD Series User Manual

Effective December 2020
8 Eaton www.eaton.com
Eaton SPD Series for mounting external
to electrical distribution equipment
Instruction Manual IM01005031E - rev. 7
BLUE / WHITE
RED / WHITE
ORANGE / WHITE
COMMON
NORMALLY OPEN
NORMALLY CLOSED
Figure 8. Sidemount form C wires
Figure 9. Split phase units
Figure 10. 3-phase delta
Figure 11. 3-phase wye units
Figure 12. High leg delta units
CAUTION
DAMAGE WILL OCCUR TO THE DEVICE IF THE HIGH LEG IS NOT ON
PHASE B.
ote: N Please consult the factory for 240 delta high leg applications with
high leg on the ‘C’ phase.
*
*Contact Factory if High
Leg is not on phase B

Eaton SPD Series Specifications

General

Type	Surge Protective Device
Voltage Rating	120/240V, 208Y/120V, 480Y/277V
Surge Current Capacity	Up to 200kA
Modes of Protection	L-N, L-G, N-G
Operating Frequency	50/60Hz
Certifications	UL 1449
SPD Type	Type 1, Type 2
Maximum Surge Current	Up to 200kA
Nominal Discharge Current (In)	10kA, 20kA
Short Circuit Current Rating (SCCR)	Up to 200kA
Enclosure Type	NEMA 1
Mounting	Panel Mount
Standards	UL 1449, IEEE C62.41
Diagnostics	Visual Indicators
Remote Monitoring	Optional
Maximum Discharge Current (Imax)	Up to 200kA