EasyManua.ls Logo

EAW KF400C User Manual

EAW KF400C
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
System
Features:
High Output 137 dB
SPL
• Wide Bandwidth 40 to 20,000 Hz (with
Optional TAD Driver) enabling the
reproduction of all the subtleties in
modern electronic keyboard based music.
Advanced Mid-Bass Forsythe
MR102L for low distortion vocal
reproduction at high sound pressure
levels.
Constant Horizontal Coverage 90
degrees to 16k Hz is ideal for side stage
monitor or large cluster use.
- High Technology RCF LAB
Drivers including the new RCF
L18/851 18-in driver with 1000 watts
AES power handling.
Introduction Applications
The EAW Forsythe Series KF400 is an all The KF-400 is intended for use in high
level
horn loaded high output, three way, sound sound reinforcement, music playback, motion
reinforcement loudspeaker system. Its "One picture sound, and performing arts appli
Box" design permits ease of transport and also cations. It will produce sound pressure levels
of
ensures optimum driver alignment and greater than 135 dB @ 1m over the 40 to
16,000
integration for ideal frequency and phase Hz band. Its ability to provide natural sonic
response linearity. The KF400 benefits from the reproduction nearfield at high sound pressure
years of development EAW has amassed since levels make it a natural side stage monitoring
we introduced the world's first "One Box" horn -system. As with all EAW horn loaded
systems,
Question and Answer IconNeed help?

Do you have a question about the EAW KF400C and is the answer not in the manual?

EAW KF400C Specifications

General IconGeneral
Nominal Impedance8 Ohms
Enclosure MaterialPlywood
LF Driver15" woofer
HF Driver1.4" compression driver
Crossover Frequency1.2 kHz
Operating ModeFull Range
Type3-way full-range loudspeaker system

Summary

System Features

Product Introduction

Product Applications

Component Breakdown

Low Frequency Section

Details the vented low frequency horn and RCF LAB L18/851 bass driver for extended response down to 40 Hz.

Mid Frequency Section

Describes the MR102L mid bass horn and RCF LAB LI2/PIIW 12-in driver for quality sound.

High Frequency Section

Covers the EAW HF590Z horn and TAID 4001 driver for flat response up to 20,000 Hz.

Architectural Specifications

Technical Specifications

Related product manuals