KF760 Series Rigging Procedures PRELIMINARY DRAFT -- 21 Aug 01
KF760 Series Rigging Procedures PRELIMINARY DRAFT -- 21 Aug 01 Page 16 of 29
12. Push the KF760 pallet aside and fly all enclosures to an appropriate working height for the next step.
2.3.4 Second And Subsequent KF761s
1. Bring in the second KF761.
2. Remove the KF761 from the pallet and place flat on an empty KF760 pallet (removed from the
KF760s) with the rear of the enclosure to the high side. Align the stacking pads on the bottom of the
enclosure with the slots in the top of the pallet rails.
To Next Page
Loading...
