Need help?Do you have a question about the EAW KF760 and is the answer not in the manual?
General| Brand | EAW |
|---|---|
| Model | KF760 |
| Category | Accessories |
| Language | English |
Details the physical characteristics and components of the Fly-Bar system.
Information on the KF760 and KF761 pallets used for transport and rigging.
Explains the two types of connecting pins and their specific applications and specifications.
Guidance on preparing Fly-Bar, enclosures, and bars for rigging.
Comparison of Tail-Bar and Pull-Back Bar methods for achieving hang angle.
Establishing pick points and assembling the Fly-Bar with Spreader and Rigging Bars.
Detailed steps for loading in KF760 and KF761 enclosures into the array.
Instructions for loading the first pallet of KF760 enclosures.
Procedure for loading additional KF760 pallets into the array.
Instructions for loading the first KF761 enclosure into the array.
Procedure for loading additional KF761 enclosures into the array.
Steps for installing and using the Pull-Back Bar during load-in.
Final steps for completing the load-in process.
Procedures for safely dismantling and unloading the KF760 array.
Steps for detaching and removing the Pull-Back Bar during load-out.
Procedure for unloading KF761 enclosures from the array.
Procedure for unloading KF760 enclosures from the array.
Final steps for unloading the last group of KF760 enclosures.
Instructions for detaching and handling the Fly-Bar during load-out.
To Next Page
