7
Machine Upgrading Accessories (Gifts)
The#1,#2,#3 are upgrade parts for the Z-axis side plan and do not require installation./#1,#2,#3零件为Z轴侧边方案升级零件，无需安装。
The #4 and #5 parts are direct extrusion upgrade solutions and do not require installation./#4 和#5零件为直接挤出升级方案，无需安装。
The #6 and #7 parts are spare parts for the extruder and do not need to be installed./#6 和#7零件为挤出机备用零件，无需安装。
The inner diameter of the free nozzle is: 1.6, 1.9, 2.3, 2.5, 3.0, 3.3mm./赠送的喷嘴内径为：1.6、1.9、2.3、2.5、3.0、3.3mm。
Z轴侧边限位螺栓 直接挤出接头 直接挤出板 挤出机O型圈 ACE挤出机套筒
#3Z-axis side limit bolt #4Direct Extrusion Connector #5Direct Extrusion Plate #6Extruder O-ring #7ACE Extruder Sleeve
润滑脂*Micro SD卡*
$1Grease*$0Micro SD*
Z轴侧边限位 Z轴侧边限位连接线
#1Z-axis side limit #2Z-axis side limit cable
* 这个物品可能根据某些地区的海关政策受限。如果您无法在包装中找到该物品，我们建议您联系当地的零售商寻找类似的产品。
*This item may be restricted according to custom policies in certain regions. If you are unable to locate the item in the packaging, we kindly suggest contacting your local retailer for similar products.
喷嘴*12*
#9Nozzle*12*
SD卡读卡器
#8SD Card Reader
针管*
$2Needle*
密度板*
$3MDF*
机器升级配件 （赠品）
* 本页面配件为机器升级配件，为赠品。因机器版本不同存在差异，如果缺失等问题，不予补发。
*The accessories on this page are machine upgrade accessories and are given as gifts. There are differences due to different machine versions. If there are problems such as missing, reissue will not be issued.
胶带
$5Tape
束线带
$4Zip Ties
绕线管
$6Bobbin
To Next Page
Loading...