25
EN
The EB-Therm 500 has a built-in start-up
guide that takes you through each step
in a simple way. When energizing the
thermostat for the first time, the system
will guide you through the most common
and important seings that are required.
You should wait four weeks aer applying
filler before the floor heating is turned on.
This gives the filler time to dry properly.
The thermostat will automatically count
down and turn on the floor heating when
four weeks have passed.
If you have any questions regarding the
usage of EB-Therm 500, please contact us
at Ebeco at any time. Call +031-707 75 50 or
send an e-mail to support@ebeco.se.
Geing started
To Next Page
Loading...
Need help?
General
