. Commissioning
You can start up the Hi-Fi Door Bell once it has been installed
correctly. To do this …
Remove the Hi-Fi Door Bell from its wall holder and place
it on its front.
Use a Philips-head screwdriver to release the screw on the
battery compartment and remove the lid.
Insert 4 batteries of the type 1.5 V C (Baby/R 114 P/UM2)
into the battery compartment; make sure that the batteries
are facing the right way.
Insert the lid back on to the battery compartment and
retighten the holding screw.
To Next Page
Loading...