36
RIO PL
www.eberg.eu
The air conditioner requires being vented outside so that the exhaust air can escape the room
which coming from the appliance contains waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased eciency, even worse shut
down the unit due to low backpressure.
Step 1
Connect the hose connector to one end of the exhaust hose.
Step 2
Connect the windows kit adapter to the other end of the exhaust hose.
Never install the unit where it could be subject to:
• Heat sources such as radiators, heat registers, stoves or other products that products that
produce heat.
• Direct sunlight
• Mechanical vibration or shock
• Excessive dust
• Lack of ventilation, such as cabinet or bookcase
• Uneven surface
4.3 ATTACH THE EXHAUST HOSE
WARNING!
Install the unit in rooms which exceed 10 m².
Do not install the unit in a place where inammable gas may leak.
NOTE!
The manufacture may provide other suitable example or may provide
additional information about the refrigerant odour.
To Next Page
Loading...
