2 / 20
About EBORN GPS Dashboard Camera G-01
The G-01 is designed to automatically turn ON when it receives power to the DC IN port. It
a
l
so
automatically shuts down and records for a few extra seconds using the internal battery when
the
power is shut off (to avoid any sudden power cuts and possibly corrupting data). Under default
sett
i
ngs
the camera always cycles or “loops” the memory card so you will always be recording and never run
out
of
space
.
Certain camera functions such as Motion Sensor and
G
---
sensor
should
remain
OFF under normal operating conditions. They are intended to be used
ONLY
when the vehicle is stationary and would interfere with normal
camera
operation while driving. Please only change the settings as
required!
If you have any questions, please contact
us!
Set Up Steps for First Time Use
1. Insert memory Card into the card slot.
(If
you have trouble use a penny to push it
i
n
.
)
2. Mount the bracket with camera ,should without
any gap.
.
2.
Connect the power cord to the DC
IN
bracket power
socket
.
To Next Page
Loading...
