Do you have a question about the Ebro EBI and is the answer not in the manual?
Warning about handling hot temperatures during measurements.
Do not touch the data logger sensor with bare hands immediately after measuring.
Adapter piece with a 147 mm shaft and a sleeve for connecting data loggers.
Adapter piece with a 97 mm shaft and a sleeve for connecting data loggers.
Adapter piece with a 72 mm shaft and a sleeve for connecting data loggers.
Adapter piece with a 47 mm shaft and a sleeve for connecting data loggers.
Adapter piece without a shaft, for use with data loggers.
Attachment piece for the sensor tube of the data logger.
10 mm extension piece for adapter combinations.
20 mm extension piece for adapter combinations.
50 mm extension piece for adapter combinations.
Wrench for tightening screws, included in the set.
Ring used to position the sensor correctly, included in the set.
Nut used to fix the adapter, M8 x 1 thread.
Warning about handling hot temperatures during measurements.
Do not touch the data logger sensor with bare hands immediately after measuring.
Adapter piece with a 147 mm shaft and a sleeve for connecting data loggers.
Adapter piece with a 97 mm shaft and a sleeve for connecting data loggers.
Adapter piece with a 72 mm shaft and a sleeve for connecting data loggers.
Adapter piece with a 47 mm shaft and a sleeve for connecting data loggers.
Adapter piece without a shaft, for use with data loggers.
Attachment piece for the sensor tube of the data logger.
10 mm extension piece for adapter combinations.
20 mm extension piece for adapter combinations.
50 mm extension piece for adapter combinations.
Wrench for tightening screws, included in the set.
Ring used to position the sensor correctly, included in the set.
Nut used to fix the adapter, M8 x 1 thread.