Ebyte E108-GN02D User Manual

Chengdu Ebyte Electronic Technology Co., Ltd. E108-GN02D User Manual
Copyright ©2012–2018
，
Chengdu Ebyte Electronic Technology Co., Ltd
4
When the baud rate is set to 9600 bps, data will be reported all the time after opening the
serial port. The common output format is as follows:
GGA: time, location, number of satellites;
GSA: GPS receiver operating mode, satellites used for positioning, DOP value, positioning
status;
GSV: visible GPS satellite information, elevation angle, azimuth angle, signal to noise ratio;
RMC: time, date, location, speed;
VTG: ground speed information;
For detailed meaning, please refer to the third section NMEA0183 protocol;
For ease of use, we recommend using the exclusive tool TaviTrack for debugging. For
detailed usage, please refer to the "naviTrack User Manual".

Ebyte E108-GN02D Specifications

General

Brand	Ebyte
Model	E108-GN02D
Category	Control Unit
Language	English