Need help?Do you have a question about the Ebyte E108-GN Series and is the answer not in the manual?
General| Hot Start Time | 1s |
|---|---|
| Interface | UART |
| Positioning Accuracy | 2.5m |
| Operating Voltage | 3.3V |
| Operating Temperature | -40°C ~ +85°C |
Provides an overview of the E108-GN series module, its features, and applications.
Lists key features including multi-system positioning, processor, interfaces, and sensitivity.
Details common applications for the module, such as vehicle navigation and wearable devices.
Defines operational parameters like voltage, temperature, and frequency band.
Specifies hardware details such as baud rate, data bits, interface, and packaging.
Outlines GPS performance metrics like positioning time, sensitivity, and accuracy.
Details the pin assignments and functions for the E108-GN01 model.
Details the pin assignments and functions for the E108-GN02 model.
Details the pin assignments and functions for the E108-GN02D model.
Shows the recommended circuit diagram for the E108-GN01 module.
Shows the recommended circuit diagram for the E108-GN02 module.
Shows the recommended circuit diagram for the E108-GN02D module.
Guides on using the serial port assistant for testing the module.
Instructions for using the naviTrack tool for debugging and testing.
Defines the data format for the Goke Command (GKC) interface.
Details various commands for controlling the GK9501 module.
Information about the supported NMEA0183 protocol.
Introduction to GPD (GPS Data Protocol) for AGPS-assisted positioning.
Instructions on how to download GPD files from the Goke website.
Guides on uploading GPD files to the chip using naviTrack.
Procedures for clearing GPD data from the module's chipset.
Explains the benefits of using GPD for improved positioning time.
Methods to accelerate GPD positioning using current time and coordinate info.
Details the serial communication process for transmitting GPD data.
Discusses factors affecting communication range.
Covers precautions to prevent module damage.
Addresses common causes for high Bit Error Rate.
Specifies temperature profiles for reflow soldering.
Illustrates the temperature curve for reflow soldering.
To Next Page
