EasyManua.ls Logo

Ebyte E108-GN02D - 3.2 Basic Parameters

Ebyte E108-GN02D
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chengdu Ebyte Electronic Technology Co., Ltd. E108-GN02D User Manual
Copyright ©2012–2018
Chengdu Ebyte Electronic Technology Co., Ltd
6
A-GNSS
10
S
Sensitivity
(Test condition 2)
Cold start
-149
dBm
Hot Start
-162
dBm
Recapture
-164
dBm
track
-166
dBm
Precision
(Test condition 3)
Horizontal positioning
accuracy
2.5
m
High positioning accuracy
3.5
m
Speed positioning accuracy
0.1
m/s
Timing accuracy
30
ns
Power consumption
(Test condition 4)
Capture current
35
mA
Tracking current
20
mA
Operating temperature
--
-35℃--85℃
--
storage temperature
--
-55℃--100℃
--
humidity
--
5%--95%RH(No
condensation)
--
Note: The above result is GPS/Beidou dual mode working mode
[Test condition 1]: The number of receiving satellites is greater than 6, the signal strength of all
satellites is -130dBm, and the average value is taken after 10 tests, and the positioning error is less
than 10 meters.
[Test condition 2]: The external LNA has a noise figure of 0.8, the number of received satellites is
greater than 6, and the received signal strength value is locked within five minutes or without
losing lock.
[Test condition 3]: Open and unobstructed environment, continuous 24 hours power-on test, 50%
CEP.
[Test condition 4]: The number of receiving satellites is greater than 6, and the signal strength of
all satellites is -130dBm.
3.2 Basic parameters
Category
Description
letter of agreement
Support NMEA0183 V4.1 and previous versions, the maximum
fixed update frequency can reach 10Hz
Supported positioning system
BDS/GPS/GLONASS/GALILEO/QZSS/SBAS
Support peripheral interface
UART (TXD/RXD)
Low power consumption
Support
Periodic low power consumption
Support
Direct low power consumption
Support
Parameter setting software
Support
Certification
Pending
Module size
22*20*5.8mm(L*W*H)
interface
6P wiring seat, spacing 1.0mm

Related product manuals