ECA PROTEUS PREMIX PPR Series User Manual

39
F47
Water Pressure
Sensor Error
Water pressure sensor is not
plugged in or there is no
contact.
1- Press reset button.
2- If the error is still present (or persists)
after reset, notify gas safe engineer.
F50
Storage Tank
Sensor Fault
Boiler sensor might be
defective.
1- Press reset button.
2- If the error is still present (or persists)
after reset, notify gas safe engineer.
F51
PT1000 Solar
Sensor Error
PT1000 solar sensor might be
defective.
1- Press reset button.
2- If the error is still present (or persists)
after reset, notify gas safe engineer.
F52
Error on
Temperature
Sensor for DHW
Temperature sensor for
domestic water might be
defective.
1- Notify gas safe engineer.
F53
Error on
Temperature
Sensor for Flue
Gas
The flue gas temperature
sensor is in short or open
circuit state.
1- Notify gas safe engineer.
F81
Temperature
Sensor
Deviation Test
Delay
Temperature sensors might be
defective.
1- Notify gas safe engineer.
Table 11.Error Code Table
14-WARRANTY AND SERVICE
Warranty Registration
Scan the QR code to register your warranty or visit www.ecaboilers.co.uk
For Full Terms and Warranty Conditions visit www.ecaboilers.co.uk. The
full terms and conditions must be strictly followed in order to manufacturer’s
warranty valid.

ECA PROTEUS PREMIX PPR Series Specifications

General

Brand	ECA
Model	PROTEUS PREMIX PPR Series
Category	Boiler
Language	English