English
English
33
Network standby mode
Network standby is a standard that allows you to turn on or wake up the device via a network message. The
message will be sent to the device via a program running on a remote device that is connected to the same
local network as the smartphone.
Your TV is WoWLAN compatible. This feature may not be available during the First Installation process. To
enable this feature, set the Network Standby option in the Network menu to On. The device from which the
network message will be sent to the TV and the TV must be connected to the same network. Network Standby
is only supported for Android devices and can only be used through the YouTube and Netix apps.
To use this feature, the TV and remote device should be connected while the TV is on. If the TV is switched o,
the connection should be restored the next time you switch it on. Otherwise, this option will not be available.
This does not apply when the TV is switched to standby mode.
The performance of some devices on the market may vary depending on the software architecture. To use
the Network Standby feature with better performance, make sure your device has the latest rmware version.
If you want your TV to consume less power in standby mode, you can disable this feature by setting Mains
Standby to O.
Wireless screen
Wireless screen is the standard for streaming video and audio content. This feature provides the ability to use
the TV as a wireless display device.
Use with mobile devices
There's an easy way to project the content of your mobile device's display onto your TV. This way you can view
(mirror) photos, videos and other content from your mobile device's display on the big screen TV. This feature
also allows you to play audio.
Make sure your mobile device and TV are connected to the same router/ Wi-Fi network. Then press the Source
button on the remote control and scroll to the Wireless Display sources.
A screen will appear to indicate that the TV is ready to connect.
Open the sharing app on your mobile device. These applications are named dierently for each brand of
mobile phone and are usually pre-installed as part of the system. But you can also install third-party apps.
In your phone's app store, look for apps labeled "screen mirroring" / "screen mirroring". Please refer to your
mobile device's user manual for detailed information.
Search for your TV in the relevant app on your mobile phone and select it to connect. After you select your TV
and connect, your device screen will be displayed on the TV.
Note: This feature can only be used if the mobile device supports this feature. If you experience connection
problems, check that the version of the operating system you are using supports this feature. Incompatibility
issues may occur with operating system versions that are released after this TV was manufactured. The
scanning and attaching processes vary depending on the program you are using.
Internet browser
If you want to use a web browser, rst open the Homemenu. Then launch the browser app that has the orange
logo with the country symbol on it.
On the browser home screen, thumbnails from the predened website links (if any) appear as speed dial
options, along with Edit Speed Dial and Add to Speed Dial options.
Use the directional buttons on the remote control to go to the web browser. To view the browser options
bar, move the cursor to the top of the page. Here you have the History, Tabs and Bookmarks options, and a
browser bar that contains the Previous/Next buttons, the Update button and the address/search bar, Quick
Dial and Vewdbrowser buttons.
To add the desired web page to the Quick Access Options list, move the cursor to the top of the page, or press.
The browser bar is displayed. Highlight the Speed dial button and press the OKbutton. Next, select Add to
speed dial and press OK. Fill in the Name and Address elds, highlight OK, and press OK to add. When you
are on the page you want to add to the speed dial list, highlight the Vewd button and press OK. Next, highlight
To Next Page
Loading...
