ECG MS 007 - Weather Symbols Explained; Troubleshooting Common Issues

EN
46
SUNNY
PARTLY CLOUDY
OVERCAST
RAIN
Note: Moving the weather station around the building aects its accuracy, because sudden changes in
altitude have an eect on its accuracy. It takes about 24 hours for the weather station to stabilize after
it is turned on. The weather symbols on the display provide indication of weather in the next 6 to
12hours and may not correspond to current weather outside.
If you loose information about the outdoor temperature
If the display shows “--” instead of the information about the outdoor temperature, it means interruption or
failure of the wireless communication with the external sensor. Press and hold the button on the weather
station. If the interruptions in communication with the external sensor continue, try to put the external unit
in another location, which will ensure atrouble-free reception of temperature data.
Notes:
The real range of the wireless transmission of data from the sensor depends on the obstacles in the path of
the signal. Each obstacle (roof, wall, ceiling, thick tree, etc) reduces the eective range of the external unit
transmitter.
WEATHER FORECAST STATION MAINTENANCE
1. Do not expose the device to extreme temperatures, direct sunlight, or liquids.
2. Avoid contact with agents causing rust.
3. Do not expose the device to mechanical stress, dust or high humidity.
4. Do not open the device or tamper with its parts.
5. Use only the power adapted supplied with the device.
TROUBLE SHOOTING
If the weather station displays incorrect information or characters, its operation could have been aected by
static electricity or by other devices. Press RESET button in the device´sback. Reset the device to default date
and time and the reception of the radio control signal will start.
Problem Solution
LCD display is empty. 1. Press RESET button on the device.
2. Replace batteries in the device.