To Next PageTo Next Page
Need help?Do you have a question about the ECH2O Tec. 1000-BHL- 2 and is the answer not in the manual?
General| Brand | ECH2O Tec. |
|---|---|
| Model | 1000-BHL- 2 |
| Category | Water System |
| Language | English |
Lists pressure gauges, flow meter, and conductivity meter for system monitoring.
Details safety features including low pressure, high pressure, and tank full switches.
Instructions for installing the fresh water flush filter housing and connecting it.
Guidelines for mounting and connecting the optional feed pump and priming reservoir.
Routing of product water tubing to storage tanks or test stations.
Connecting the reject water hose for proper brine disposal.
Steps to safely shut down the watermaker system.
Procedure for flushing the watermaker with fresh water after use or for short-term storage.
Steps to preserve RO membranes for long-term storage up to ten months.
Steps for disassembling and assembling the pump head.
Procedure for inspecting and replacing pump inlet/outlet valves and O-rings.
Instructions for replacing packing and recovery seals in the pump.
Steps for removing, checking, and replacing pump pistons.
Procedure for replacing oil seals and O-rings in the pump.
Maintenance steps for the pump's crank mechanism.
