LonWorks Twisted Pair Control Module User's Guide 3
Pin Number Signal Name Description
8 SCL I
2
C serial clock for in-circuit programming
9 SDA_CS1~ I
2
C serial data for in-circuit programming
10 SVC~ Service (active low)
11 IO0 IO0 for I/O objects
12 IO1 IO1 for I/O objects
13 IO2 IO2 for I/O objects
14 IO3 IO3 for I/O objects
15 IO4 IO4 for I/O objects
16 IO5 IO5 for I/O objects
17 IO6 IO6 for I/O objects
18 IO7 IO7 for I/O objects
19 IO8 IO8 for I/O objects
20 IO9 IO9 for I/O objects
21 IO10 IO10 for I/O objects
22 IO11 IO11 for I/O objects
23 MOV_GND Return (ground) for MOV ESD clamp
24 GND Ground
25 FT_NETA FT network connection
26 FT_NETB FT network connection
Note: The FT 5000 Control Module incorporates DC blocking capacitors and
therefore can directly connect to either non-link power or link power channels.
Neuron 3150 Control Modules
The following sections describe the electrical interface for the Neuron 3150
Control Modules.
To Next Page
Loading...