4 Electrical Interface
P1 and P2 Connector Terminals
Table 3, Table 4 on page 5, and Table 5 on page 5 show the pinout of the P1
and P2 connector terminals for the Neuron 3150 Control Modules. The I/O pin
function names defined in Table 3 are the same as those used in the Neuron
Chip Data Book, which defines the functions and electrical characteristics for the
signal names. The I/O signals are connected directly to the Neuron 3150 Chip
without buffering.
Table 3. 18-pin I/O Connector (P1) for Neuron 3150 Control Modules
Pin Number Name Description
1 NC No Connect
2 IO0 IO0 for I/O objects
3 GND Ground
4 IO1 IO1 for I/O objects
5 GND Ground
6 IO2 IO2 for I/O objects
7 GND Ground
8 IO3 IO3 for I/O objects
9 RESET~ Reset (active low)
10 IO4 IO4 for I/O objects
11 IO5 IO5 for I/O objects
12 +5 V 5 V Input Power
13 IO6 IO6 for I/O objects
14 IO9 IO9 for I/O objects
15 IO7 IO7 for I/O objects
16 IO10 IO10 for I/O objects
17 IO8 IO8 for I/O objects
18 SERVICE~ Service (active low)
To Next Page
Loading...