LonWorks Twisted Pair Control Module User's Guide 11
Table 6. Socket Strips Suitable for Use with the Control Module Header Pins
Manufacturer P1: 18-pin (2 X 9) P2: 6-pin (1 X 6)
Samtec SSW-109-01-T-D SSW-106-01-T-S
Methode * 9000-209-303 9000-106-303
Advanced
Interconnections
BC-009-124TL BC006-123TL
* Not recommended for use with the TP/FT-10 or TP/FT-10F Control Modules.
Figure 6. Recommended Spacing between the TP/XF-78, TP/XF-78F, and TP/XF-1250
Control Modules and the Application Electronics Board
Figure 7. Recommended Spacing between the TP/FT-10 and TP/FT-10F Control Modules
and the Application Electronics Board
To Next Page
Loading...