EasyManua.ls Logo

Echo CS-260TES - User Manual

Echo CS-260TES
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
00-26C-01
1
INTRODUCTION
We are constantly working on technical im-
provement of our products. For this reason,
technical data, equipment and design are
subject to change without notice. All speci-
fications, illustrations and directions in this
SERVICE DATA are based on the latest
products information available at the time
of publication.
ECHO SERVICE MANUAL Ord.
401-22(Model : CS-2600) contains lots of
information for servicing this model.
0
CONTENTS
page
1 SERVICE INFORMATION
.............................. 2
1-1 Speci cation ............................................... 2
1-2 Technical data ............................................. 3
1-3 Torque limits................................................ 4
1-4 Special repairing materials ......................... 5
1-5 Service limits............................................... 6
1-6 Special tools ............................................... 7
2
CARBURETTOR ADJUSTMENT PROCEDURE
........ 8
2-1 General adjusting rules .............................. 8
2-2 Presetting idle adjust screw, L mixture needle
and H mixture needle ...................................... 8
2-3 Adjusting carburettor ................................ 10
Reference No.
00-26C-01
REVISED: 200804
ISSUED: 200703

Questions and Answers

  • J
    Jonathan CooperAug 1, 2025
    Why is my Echo CS-260TES engine hard to start or not starting?
    • C
      Cory SimsAug 1, 2025
      If your Echo Chainsaw engine is hard to start or won't start, consider these potential causes and solutions: * **Fuel at carburettor:** If there is no fuel at the carburettor, clean or replace it. * **Silencer wet with fuel:** Open the choke, clean or replace the air filter, or adjust the carburettor. * **Spark at end of plug wire:** If there is no spark at the end of the plug wire, turn the switch on. * **Spark at plug:** If there is no spark at the plug, adjust it to 0.6 to 0.7 mm, clean or replace it, or simply replace the plug.
  • N
    Nathan ScottAug 16, 2025
    What to do if my Echo Chainsaw engine runs but dies or accelerates poorly?
    • N
      Natasha WeberAug 16, 2025
      If your Echo Chainsaw engine runs but dies or accelerates poorly, the issue might stem from several factors: * A dirty air filter: Clean or replace the air filter. * A dirty fuel filter: Clean or replace the fuel filter. * A plugged fuel vent: Clean the fuel vent. * Spark plug issues: Clean, adjust, or replace the spark plug. * Carburettor problems: Adjust the carburettor. * A plugged cooling system: Clean the cooling system. * A plugged exhaust port or silencer: Clean the exhaust port or silencer.

Echo CS-260TES Specifications

General IconGeneral
Engine Displacement25.4 cc
Bar Length10, 12 inch
Weight2.9 kg (dry)
Engine Type2-stroke
Weight (dry)2.9 kg
Chain Pitch3/8 inch
Chain Gauge0.050 inch
Fuel Tank Capacity0.24 l
Oil Tank Capacity0.16 l
Oil Capacity0.16 l
Fuel Capacity0.24 l
Chain Oil Tank Capacity0.16 l

Related product manuals