Echo CS-330EVL - PREPARATION FOR USE; FRONT HANDLE and HAND GUARD INSTALLATION

CS-330EVL only PREPARATION FOR USE
\
\
\
FRONT HANDLE and HAND GUARD INSTALLATION
Install the front handle and hand guard before installing
the guide bar and saw chain, in numerical order as shown.
M 5- 35 mm long
®
\
Tighten the screw
using the wrench.
®
®
®
M 5- 20 mm long
\
M 5- 20 mm Ion
Tighten the screws
using the wrench.
®
Install the screw
hand tight.
Retainer
Turn the retainer
until it fits the
insert, and then
tighten the screw
using the wrench.