Echo CHAIN SAW CS-330T User Manual

Specifications, descriptions and illustrative material in this literature are as accurate as known at the time
of publication, but are subject to change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
Instruction Manual
X7503245101
© 08/2013 ECHO Inc.
x7722271404 / x772000164
CS-330T
CHAIN SAW
Burn Hazard
The muffler or catalytic muffler and surrounding cover may become extremely hot.
Always keep clear of exhaust and muffler area, otherwise serious personal injury may
occur.
The engine exhaust from this product contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
Users of this equipment risk injury to themselves and others if the unit is used
improperly and/or safety precautions are not followed. ECHO provides an operator’s
manual and a safety manual. Both must be read and understood for proper and safe
operation. Failure to do so could result in serious injury.

Echo CHAIN SAW CS-330T Specifications

General

Brand	Echo
Model	CHAIN SAW CS-330T
Category	Chainsaw
Language	English

Summary

PACKING LIST

Packing List Contents

Lists all components included in the product packaging for verification upon receipt.

SAFETY

Rules For Safe Operation

Provides kickback safety precautions for chain saw users, emphasizing proper grip and awareness.

Correct Use Of Chain Brake

Explains chain brake operation and testing procedures, including warnings about misuse.

Automatic Chain Brake Operation

Details steps to ensure the automatic chain brake functions correctly and provides other safety precautions.

Other Safety Precautions

Lists general safety rules for operating a chain saw, including handling, operation, and maintenance.

Personal Condition and Safety Equipment

Covers operator's physical/mental condition and required safety equipment like eye, hand, and hearing protection.

Vibration and Cold Hazards

Discusses Raynaud's Phenomenon, its causes from vibration/cold, and recommended precautions.

Repetitive Stress Injuries

Explains RSI/CTS, risks, and methods to reduce injury, including proper hand and wrist posture.

Symbols and Signs Explained

Explains various symbols and their meanings used throughout the manual for safety and operation.

EMISSION CONTROL

EPA 2010 and Later Standards

Details emission control systems, labels, and compliance periods for engines meeting specific standards.

DESCRIPTION

Unit Components Overview

Identifies chainsaw components via a numbered diagram for easy reference during assembly and maintenance.

Component Descriptions and Terms

Provides detailed descriptions of each numbered component of the chainsaw and defines key terms.

Preparation For Use

Guides users through initial preparation steps, including installing the tip guard and guide bar.

Chain Installation and Tensioning

Details procedures for installing the guide bar and saw chain, and adjusting chain tension correctly.

OPERATION

Fuel Requirements and Handling

Explains fuel requirements, recommended mixtures, safe handling practices, and storage advice.

Starting Procedures

Provides step-by-step instructions for starting both cold and warm engines, including safety checks.

Running and Stopping the Saw

Describes how to operate the chain saw safely after starting, including acceleration, chain movement, and stopping procedures.

Cutting Techniques

Offers general guidelines, including chain tension, lubrication tests, and specific cutting instructions like felling and bucking.

MAINTENANCE

Maintenance Intervals and Skill Levels

Presents a table outlining maintenance procedures, skill levels, and intervals for various components.

Carburetor Adjustment

Details factory settings, altitude adjustments, and procedures for carburetor tuning.

Component Maintenance Procedures

Provides instructions for maintaining key components like air filter, spark plug, fuel system, and oiler.

Guide Bar and Sprocket Care

Details how to clean, maintain, and care for the guide bar and sprocket for optimal performance.

Spark Arrestor and Exhaust Port Cleaning

Provides instructions for cleaning spark arrestor screens and exhaust ports to maintain engine performance.

Setting The Saw Chain

Explains important points for saw chain maintenance and how to sharpen cutters and depth gauges.

TROUBLESHOOTING

Engine Problem Troubleshooting Chart

A chart listing engine problems, checks, causes, and remedies for effective troubleshooting.

STORAGE

Storage After Use

Provides detailed instructions for inspecting, cleaning, and preparing the chain saw for long-term storage.

TECHNICAL DATA

Chainsaw Specifications

Lists detailed technical specifications for the CS-330T model, including dimensions, engine details, and capacities.

WARRANTY STATEMENTS

Warranty Coverage and Periods

Outlines ECHO's limited warranty for products sold in USA and Canada, covering periods and exceptions.

Warranty Exclusions and Owner Responsibilities

Lists conditions not covered by warranty and emphasizes owner responsibilities for maintenance and care.

SERVICING INFORMATION

Parts and Serial Number Identification

Explains how to identify and record model and serial numbers for parts ordering and service.

Service and Product Support

Details where and how warranty service and repairs should be performed, and provides customer support contact information.

Manuals and Safety Videos

Informs users on how to obtain replacement manuals, parts catalogs, and safety videos.