Echo CS-450P User Manual

26 X7503197605
© 01/2014 ECHO Inc.
OPERATION CS-450P
Chain And Guide Bar Combination
The following combinations are recommended for model CS-450P.
20LPX Chain is a high-performance chain intended for professional or experienced chain saw
operators, and increases risk of kickback.
Use of replacement saw chain and/or guide bar other than that specified, or operation without the
“tip guard” in place, may cause severe kickback resulting in serious injury. Only use replacement
guide bar and saw chain that has been designated as meeting ANSI B175.1 or CSA Z62.1, .3
requirements. All of the guide bar and chain combinations listed above meet ANSI B175.1 or CSA
Z62.1, .3 requirements.
Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table above.
Model
Bar Length in.
(mm)
Guide Bar Saw Chain
ECHO P/N ECHO Part No. Links Pitch in. (mm) Gauge
CS-450P
16 (406 )
16F0AD3366 20BPX66CQ
66 0.325 (8.26) 0.05016F0MD3366 95VP66CQ
16F0LD3366 20LPX66CQ
18 (457)
18F0AD3372 20BPX72CQ
72 0.325 (8.26) 0.05018F0MD3372 95VP72CQ
18F0LD3372 20LPX72CQ
20 (508)
20F0AD3378 20BPX78CQ
78 0.325 (8.26) 0.050
20F0LD3378 20LPX78CQ

Echo CS-450P Specifications

General

Brand	Echo
Model	CS-450P
Category	Chainsaw
Language	English