part, which is away from the
operator.
• Do not start the machine
when standing in front of
the discharge opening.
• Do not put hands or feet
near or under rotating parts.
Keep clear of the discharge
opening at all times.
• Do not transport the
machine while the power
source is running.
• Stop the machine, remove
the disabling device and
battery pack. Make sure
that all moving parts have
come to a complete stop
• whenever you leave the
machine;
• before clearing blockages
or unclogging chute;
• before checking, cleaning
or working on the
machine;
• after striking a foreign
object. Inspect the
machine for damage
and make repairs before
restarting and operating
the machine;
• if the machine starts to
vibrate abnormally (check
immediately);
• inspect for damage;
• replace or repair any
damaged parts;
• check for and tighten any
loose parts.
2.4 MAINTENANCE
• Keep all nuts, bolts and
screws tight to be sure the
machine is in safe working
condition.
• Check the grass collector
frequently for wear or
deterioration.
• Be careful during
adjustment of the machine
to prevent entrapment of
the fingers between moving
blades and fixed parts of
the machine.
• Always allow the machine
to cool down before storing.
• When servicing the blades
be aware that, even
though the power source is
switched off, the blades can
still be moved.
6
English Original Instructions
EN
To Next Page
Loading...
Need help?
General
