EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English 27
TECHNICAL DATA CHAINSAW ECCS-58V
Serial numbers 17402201000001 - 17402201999999
Rated voltage 51.1 V, 58 V MAX
Max bar length 400 mm
Chain oil tank capacity 177 ml
Weight (without battery pack, with guide bar, chain and empty tank) 4.83 kg
Weight (with 4.0 Ah battery pack) 6.73 kg
Weight (with 2.0 Ah battery pack) 6.03 kg
Max no-load speed 21 m/s
Usable cutting length 250 mm
Noise emission level (in accordance with EN 60745-1, EN 60745-2-13)
A-weighted sound pressure level at working position L
PA
: 94.5 dB(A)
K
PA
: 2.5 dB(A)
A-weighted sound power level L
WA
: 105.5 dB(A)
K
WA
: 2.5 dB(A)
Vibration level (according to EN 60745-1, EN 60745-2-13) (Front/Rear): 2.1 / 2.8 m/s
2
K =1.5 m/s
2
BATTERY AND CHARGER ECCS-58V
Compatible battery packs ECBP-58V40 / ECBP-58V20
Compatible chargers ECBC-58VEU / ECBC-58VUK
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, the vibration emission may differ.
This may signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may signifi cantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
GENERAL SAFETY WARNINGS
WARNING!
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well-lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of fl ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
To Next Page
Loading...
Need help?
General
