Echo GT-2000R

Grass Trimmer
Operator's Manual
MODEL GT-2000R Type 1E
Serial Number 001001 & Up
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation.
X770000541
11/01
X7702275801

Echo GT-2000R Specifications

General

Brand	Echo
Model	GT-2000R
Category	Trimmer
Language	English

Summary

Introduction and Overview

Operators Manual Purpose

Details the content and purpose of the Operator's Manual for future reference.

Safety Manual Purpose

Explains the Safety Manual's role in hazard identification and safety measures.

Manual Safety Symbols and Information

Safety Decals Explained

Locates and explains the meaning of safety decals found on the unit.

International Symbols and Safety Instructions

International Symbols Guide

Provides a visual guide to common symbols used in the manual and on the product.

Personal Safety Equipment

Details essential personal protective equipment and proper clothing for safe operation.

Extended Operation and Equipment

Operation in Extreme Conditions

Advice on managing vibration, cold, and repetitive stress injuries during operation.

Equipment Safety Checks

Pre-operation checks for unit integrity, attachments, and safety features.

Operation Basics

Safe Operation Practices

Guidelines for maintaining a firm grip, solid stance, and avoiding hazards.

Emission Control System

Information about the engine's emission control system and relevant labels.

Product Description and Assembly

Product Overview and Initial Checks

Description of the factory-assembled unit and initial checks upon unpacking.

Product Components Description

Engine, Fuel, and Control Components

Detailed descriptions of the engine, fuel system, controls, and starter components.

Cutting Head and Shield Components

Descriptions of the cutting head, line, and debris shield assembly.

Specifications

Assembly Procedures

Plastic Shield Installation

Step-by-step instructions for mounting the plastic debris shield.

Nylon Line Head Assembly

Procedure for assembling the rapid loader line head onto the drive shaft.

Line Installation and Handle Adjustment

Nylon Line Installation

Instructions for installing new nylon trimmer line into the cutting head.

Front Handle Adjustment

Guidance on repositioning and tightening the front handle for optimal use.

Fueling Procedures

Fuel Requirements and Mixing

Specifies gasoline and oil requirements, and the correct fuel mixing procedure.

Fuel Handling Safety

Critical safety warnings and precautions for handling, storing, and refueling fuel.

Engine Operation

Starting a Cold Engine

Step-by-step procedure for starting the engine when it is cold.

Starting a Warm Engine

Procedure for starting the engine when it has been recently used.

Stopping the Engine

Instructions on how to safely shut down the engine.

Maintenance Procedures

Maintenance Intervals and Skill Levels

Overview of maintenance tasks, required skill levels, and recommended intervals.

Air Filter Maintenance

Instructions for cleaning or replacing the air filter element.

Fuel Filter Maintenance

Procedure for inspecting and replacing the fuel filter.

Spark Plug Service

Guidance on checking, cleaning, and adjusting the spark plug gap.

Cooling System Cleaning

Steps to clean cooling fins and air intakes for proper engine temperature.

Exhaust System Service

Procedure for cleaning or replacing the spark arrestor screen.

Carburetor Adjustment

Instructions for adjusting the carburetor for optimal engine performance.

Lubrication Procedure

Guidance on lubricating the drive shaft and bearing housing.

Troubleshooting Guide

Long Term Storage

Servicing Information

Parts and Service

Information on obtaining genuine ECHO parts and authorized dealer service.

Consumer Product Support

Contact details for customer assistance regarding product application and maintenance.

Manuals and Videos

Information on acquiring additional operator manuals, safety manuals, and videos.