Echo GT-200R - 07-07

Grass Trimmer
Operator's Manual
MODEL GT-200R
WARNING
Read rules for safe operation and instructions carefully. ECHO provides an Operator's
Manual and a Safety Manual. Both must be read and understood for proper and safe
operation.
X771000741
07/07
X7712277201

Echo GT-200R - 07-07 Specifications

General

Engine Displacement	21.2 cc
Shaft Type	Straight
Engine Type	2-stroke
Cutting Swath	12 in
Cutting Width	12 in
Power Output	0.8 hp

Summary

Introduction

The Operators Manual

Information for operation, starting, stopping, maintenance, storage, and assembly specific to the unit.

The Safety Manual

Explains possible hazards of grass trimmers and safety measures to make their use safer.

Safety

Manual Safety Symbols and Important Information

Explains safety alert symbols, keywords, and their meanings.

International Symbols

Displays and explains various international safety symbols used on the unit.

Personal Condition and Safety Equipment

Physical Condition and Proper Clothing

Guidelines on physical fitness, appropriate attire, and footwear for safe operation.

Eye, Hand, and Hearing Protection

Recommendations for protective gear including eye, hand, and hearing protection.

Hot Humid Weather and Vibration

Advice on operating in hot weather and managing vibration effects.

Operational Safety Guidelines

Repetitive Stress Injury Prevention

Tips to reduce the risk of Repetitive Stress Injuries (RSI) and Carpal Tunnel Syndrome (CTS).

General Safety Precautions

Includes warnings about engine exhaust, reading manuals, clearing work area, and maintaining stance.

Equipment and Emission Control

Equipment Checks and Warnings

Instructions for checking unit components and warnings about moving parts.

Emission Control Information

Details on emission control systems and durability compliance periods.

Unit Description and Decals

Component Identification

Locates and identifies various safety decals on the unit.

Component Details

Power Head to Cutter Head Components

Detailed descriptions of parts from the power head to the cutter head.

Assembly and Contents

Package Contents Checklist

Lists all items included in the package and instructions for checking for damage.

Assembly Instructions

Outlines the tools and parts required for assembling the unit.

Assembly Steps

Plastic Shield and Line Head Installation

Step-by-step guide for installing the plastic shield and nylon line head.

Nylon Line Installation

Instructions on how to thread new nylon line into the cutting head.

Operation and Fuel

Front Handle Adjustment

Guidance on positioning and tightening the front (loop) handle for optimal operation.

Fuel Requirements and Warnings

Details on approved gasoline and oil, and warnings regarding alternative fuels.

Fuel Handling and Storage

Two-Stroke Oil and Fuel Mixing

Specifications for two-stroke oil and instructions for mixing fuel and oil.

Fuel Handling and Storage Guidelines

Safety precautions for handling fuel and recommendations for storage.

Starting Cold Engine

Cold Start Procedure

Step-by-step guide to start the engine when it is cold.

Engine Starting and Stopping

Starting Warm Engine

Procedure for starting the engine when it is already warm.

Stopping the Engine

Instructions on how to safely stop the engine.

Maintenance

Skill Level and Maintenance Intervals

Classifies maintenance tasks by skill level and lists intervals for procedures.

Routine Maintenance Tasks

Air Filter and Fuel Filter Maintenance

Procedures for cleaning or replacing the air filter and fuel filter.

Engine Component Maintenance

Spark Plug and Cooling System Care

Instructions for spark plug maintenance and cleaning the cooling system.

Exhaust System Maintenance

Spark Arrestor Screen and Exhaust Port

Steps for cleaning or replacing the spark arrestor screen and inspecting the exhaust port.

Carburetor Adjustment

Adjusting the Carburetor

Procedure for adjusting the idle speed of the carburetor for optimal performance.

Lubrication

Drive Shaft Lubrication

Instructions for lubricating the drive shaft with grease.

Troubleshooting

Engine Problem Diagnosis and Remedies

A chart to diagnose and resolve common engine starting and running problems.

Storage Procedures

Long Term Storage Maintenance

Steps for preparing the unit for long-term storage to prevent damage.

Specifications

GT-200 R Model Specifications

Technical specifications for the GT-200R grass trimmer model.

Servicing and Support Information

Parts, Service, and Warranty Registration

Information on obtaining parts, warranty service, and registering the product.

Consumer Support and Manuals

Contact information for consumer support and how to get additional manuals or safety videos.